Advance acoustic 56303000, Руководство по ремонту механических устройств

Страница: 11 / 50

FORM NO. 56043096 - Captor
™
4300B, 4800B - 9
STEERING SYSTEM
STEERING CHAIN ADJUSTMENT
1 Turn the Key Switch (Main Power) (CC) to the OFF position, set the Parking Brake (OO) and disconnect the batteries.
2 See Figure 1.3. Remove the (4) steering shaft cover screws and (6) (J) Floor Plate (Chain Cover) screws then remove both covers together.
3 Loosen the 4 (K) Bolts that secure the chain idler sprockets assembly to the floor. Turn the Lock Nut (L) on the idler tension adjustment bolt to
set the tension. The chain should have a deflection of 11/16 inch (17.48mm) with 25 lbs of pull (force) applied at its midpoint.
4 Follow steps 2-3 in reverse order to re-assemble then test steering for proper operation.
STEERING CHAIN REMOVAL
1 Follow the Solution Tank Removal instructions in this manual.
2 Turn the Key Switch to the OFF position, set the Parking Brake and disconnect the batteries.
3 See Figure 1.3. Remove the (4) steering shaft cover screws and (6) (J) Floor Plate (Chain Cover) screws then remove both covers together.
4 Loosen the 4 (K) Bolts that secure the chain idler sprockets assembly to the floor. Loosen the Lock Nut (L) on the idler tension adjustment bolt
which then will release the chain tension.
5 Remove the 4 (M) Bolts that fasten the Chain Cover Plate to the Gearbox to gain accesses to Steering Chain Links.
6 Remove both master links securing the steering chain at the Steering Plate (N) then remove the chain.
7 Follow above steps in reverse order to re-assemble.
8 See Steering Chain Adjustment in this manual to complete installation.
FIGURE 1.3