ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 82 / 196

Section 4 User Interface Guide Total Access 600R System Manual
82 © 2002 ADTRAN, Inc. 61200600L1-1A
B
RIDGE
> C
ONFIG
> I
NTERFACES
(T1[0]) > S
UB
-I
NTERFACE
The T1 sub-interface is PPP [0.0] if the
L2 P
ROTOCOL
is set for
PPP
. The [0.0] represents the T1 physical
and logical ports, respectively. This is a read-only field. The T1 sub-interface is
FRE [0.X]
if the
L2
P
ROTOCOL
is set for
FRAME RELAY
. The [0.X] represents the T1 physical and logical ports, respectively.
The T1 physical port is always 0. The X represents the Frame Relay logical port and will be a number
between 0-9 corresponding to the interface number under
L2 P
ROTOCOL
> C
ONFIG
> DLCI M
APPING
. This is
a read-only field.
B
RIDGE
> C
ONFIG
> I
NTERFACES
(ETH[1])
Configure the Ethernet Bridging parameters from this menu.
B
RIDGE
> C
ONFIG
> I
NTERFACES
(ETH[1]) > S
UB
-I
NTERFACE
The Ethernet sub-interface is 802.3[1.0]. The [1.0] represents the Ethernet physical and logical ports,
where 1 is the physical port and 0 is the logical port assigned to the Ethernet interface. This is a read-only
field.
B
RIDGE
> C
ONFIG
> B
RIDGE
T
ABLE
Configure the bridge table parameters from this menu.
B
RIDGE
> C
ONFIG
> B
RIDGE
T
ABLE
> B
RIDGE
T
ABLE
A
GING
(0-65535)
B
RIDGE
T
ABLE
A
GING
is how soon an entry ages out of the Bridge table (in minutes). Default is
5
.
B
RIDGE
> S
TATUS
View the bridging statistics from this menu.
B
RIDGE
> S
TATUS
> B
RIDGE
T
ABLE
View the bridge table status from this menu.
B
RIDGE
> S
TATUS
> B
RIDGE
T
ABLE
> MAC A
DDRESS
Ethernet address for device learned. This is a read-only field.
B
RIDGE
> S
TATUS
> B
RIDGE
T
ABLE
> L
OCATION
Location indicates if it is LAN or WAN. This is a read-only field.
The ETH[1] interface will not appear as a bridge interface entry if the mode is set to route
IP.