Installation
1. Connect one end of the phone cable to the
DSL
port on the gateway and connect the other end to the phone jack
on the wall installed by your provider.
2. Connect one end of the Ethernet cable to a
LAN
port on the gateway and connect the other end to your computer.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the
Power
port of the gateway.
Turn on the unit by pressing the
On/Off
button on the back of the gateway.
4. If you plan to create an LTE connection, insert a SIM card into the
SIM
slot located under the
WAN
port.
Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to
complete before you can begin using your Internet applications (browser, email, etc.). If you are unable to connect to the
Internet, verify that all cable connections are in place and the gateway’s power is turned on.
Содержание SR700ac
Страница 1: ...SR700ac Quick Start Guide...
Страница 3: ...POWER WAN DSL 1 2 3 4 Reset SIM 1 2 3 3...
