NetVanta SHDSL Network Interface Module (NIM)
P/N 1200867L1
For more detailed documentation, visit us online at
Quick Start Guide
®
Quick Start Guide, 61200867L1-13C, July 2005
ADTRAN Technical S1-256-963-8716
Copyright © 2005 ADTRAN, All Rights Reserved
WAN-SHDSL
DBU
I
NSTALLATION
I
NSTRUCTIONS
1.
Remove power from the base unit.
2.
Slide the option module into the option slot until the module is firmly
seated against the chassis.
3.
Secure the pins at both edges of the module.
4.
Connect the cables to the associated device(s).
5.
Complete installation of the base unit.
6.
Restore power to the base unit.
NetVanta modules should be installed only in
NetVanta Series products.
WAN-SHDSL N
ETWORK
(RJ-45) P
INOUTS
Pin
Name
Description
1-3
— Unused
4
T
Network - Tip
5
R
Network - Ring
6-8
—
Unused
An optional Dial Backup Interface Module (DIM) is
required for dial backup applications.
For a description of the DBU pinouts, refer to the
Quick Start Guide included with your DIM shipment.
Important:
For additional details on product features,
specifications, installation, and safety, refer to the
appropriate Hardware Installation Guide on the
ADTRAN OS System Documentation
CD shipped
with the base unit and available online at
www.adtran.com.
S
PECIFICATIONS
Operating Modes
Line termination (CO), network termination (CPE)
SHDSL Interface
Supported Standards: ITU-T G.991.2 SHDSL
Line Rate: 200 to 2312 kbps in 64k increments
Line Code: TC-PAM
Connector: RJ-45
Clock Source
CO Operating Mode: Internal
CPE Operating Mode: Network
Diagnostics
Test Pattern Generation and Detection: 2
15
- 1
Network loopbacks (local and remote)
Alarm generation and detection
Programmable alarm threshold settings for loop
attenuation and signal-to-noise ratio margin
Compliance
FCC Part 15 Class A, EN 55022 Class A,
EN 55024, EN 61000-3-2, EN 61000-3-3
AS/ACIF S043
EN 60950, AS/NZS 60950
Physical
Dimensions: 2.75-inch W x 4.25-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent,
noncondensing
