Logging Into the 831-t5
831-t5 Mesh AP QSG
4
6SDG831T5-13A
Logging Into the 831-t5
A browser-based graphical user interface (GUI) is used to manually configure the 831-t5. The following steps describe how to connect and login
to the device:
1. Ensure your computer is connected to the 831-t5 either via Wi-Fi or Ethernet connection to the LAN port.
2. Configure your computer’s network interface to acquire an IP address automatically using DHCP.
3. Open a web browser and enter the following:
http://router
or
http://setup
. A sign-in page should appear. If you are unable to connect to
the 831-t5 using either of these shortcuts, you can also enter the IP address of the unit. The default IP address is
192.168.0.1
.
4. Enter the default username and password. The default username is
admin
and the default password is
admin
.
5. Select
Sign In
. The
Dashboard
page appears, showing data about the system.
Product Specifications
Electrical
■ Power is provided by a 12V DC power adapter that is included with the 831-t5. The power adapter operates from a power source of 100 to
240V AC, 50 - 60 Hz. The nominal output is 12V DC ±5% with a minimum current rating of 3.0 Amps. For US and Canadian applications, a
UL Listed limited power source (LPS) is supplied and required for use. For deployment outside of North America, an LPS specifically
approved for that country, such as a CE Mark, is supplied and required for use.
Environment
■ Operating Temperature: 32°F to 104°F (0°C to 40°C)
■ Storage Temperature: -40°F to 158°F (-40°C to 70°C)
■ Relative Humidity: 10 to 95 percent, non-condensing
Compliance
This product meets the following compliance requirements:
■ UL /cUL Listed
■ FCC Part 15, Class B
■ ICES-003 (Class B)
■ IEC 62368-1
■ EN 62368-1, AS/NZS 62368.1
■ RoHS Compliant
NOTE
g
If you have forgotten the password for this device, select
Forgot password?
and follow the instructions to reset the device to the factory
defaults. Next, follow the instructions under
.
NOTE
g
It is strongly suggested that the power supply (a 5-foot (1.5 m) power cord) included with the 831-t5 be connected to a surge suppressor
device which can have its own extension cable. The surge protection device should provide L-N, L-G, and N-G protection. It is also
recommended that the device contains a visual 'GOOD' indicator.
NOTE
g
Changes or modifications not expressly approved by Adtran will void the warranty.
