HDSL4 3192 H4TU-C
1221404L1
DSX
ALM
DSL 1
DSL 2
LBK
ESF
/SF
B8ZS
/AMI
H TUC
TX
RX
TX
RX
DSX MON
DSX EQ
HDSL4 3192
H4TU-C
CLEI: T1L133X4_ _
LED STATUS
DSL1/DSL2
●
Green
Loop 1/ Loop 2 synchronization achieved and signal is present.
No errors currently detected, and SNR margin
≥
6 dB.
●
Red
Loop 1/ Loop 2 synchronization not achieved, in sync with errors,
or SNR margin
≤
6 dB.
DSX
●
Green
DSX-1 signal present and no errors currently detected.
●
Red
In framed mode, denotes loss of framing or loss of sync at the
DSX-1 input. In unframed mode, denotes loss of signal DSX-1
input.
ALM
●
●
Off
No T1 alarms are active.
●
Red
Loss of DSX-1 signal from the network.
●
Yellow
Loss of DS1 signal from the CPE.
ESF/SF
●
●
Off
Unframed.
●
Yellow
ESF framing
●
Green
SF framing
B8ZS/AMI
●
Yellow
B8ZS line coding.
●
Green
AMI line coding.
LBK
●
●
Off
No local loopbacks active.
●
Yellow
Local loopback active.
DSX EQ SPLITTING JACKS
TX
DSX-1 transmit toward the local loop (intrusive)
RX
DSX-1 receive from the local loop (intrusive)
DSX MONITOR JACKS
TX
DSX-1 transmit toward the local loop (nonintrusive)
RX
DSX-1 receive from the local loop (nonintrusive)
COMPLIANCE
This product is intended for installation in restricted access locations only and in equipment
with a Type “B” or “E” enclosure.
The DSX-1 interface is intended for connection to intra-building wiring only.
This product provides span powering voltage (negative only with respect to ground, -190 VDC
nominal, GFI protection < 5 mA) and meets all requirements of Bellcore GR-1089-CORE (Class A2)
and ANSI T1.418 Issues 1 and 2.
■
For a complete Installation and Maintenance Practice (P/N 61221404L4-5): (877) 457-5007, faxback
D
ocument 795. Please have your fax number ready.
■
C A U T I O N
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
ut
Code
Input Output
Installation Code (IC)
A
–
Telecommunication Code (TC)
–
X
Power Code (PC)
F
C
1
2
3
4
5
6
7
8
9
10
A
B
C
D
E
F
H
J
K
L
R1 RX DSX (Out to DSX)
R TX DSX (In from DSX)
GND
R1 HDSL4 Loop 2
-48V
R HDSL4 Loop 1
T TX DSX (In from DSX)
T1 RX DSX (Out to DSX)
RCV LOS (to Alarm Module)
T1 HDSL4 Loop 2
Frame Ground
T HDSL4 Loop 1
Fuse Alarm (to Alarm Module)
H4TU-C EDGE CONNECTOR WIRING
JOB
A
ID
61221404L1-22A
020
6
#61221404L1-22A#
