Physical Descriptions
NetVanta 3200/3300/3400 Series
32
Copyright © 2019 ADTRAN, Inc.
61200860L1-34AE
NetVanta 3450 Front Panel Design
The NetVanta 3450 front panel is shown below. Front panel LED descriptions are given in
.
Status
WAN 2
DBU 2
ETH1
ETH2
CompactFlash
NetVanta 3450
WAN 1
DBU 1
CONSOLE
Figure 12. NetVanta 3450 Front Panel Layout
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
CompactFlash
The front panel contains a
CompactFlash
slot for nonvolatile configuration storage and compressed code
storage. ADTRAN supports any industry standard 1 GB CompactFlash card. Refer to
.
NetVanta 3450 Rear Panel Design
The NetVanta 3450 rear panel is shown below with a module installed.
provides
pinouts.
SLOT 2 NET/DBU
SLOT 1 NET/DBU
ETH 0/2
ETH 0/1
Figure 13. NetVanta 3450 Rear Panel Layout
NetVanta 3450 Rear Panel Interfaces
SLOT 1/SLOT 2 NET/DBU Option Slots
The
SLOT 1/SLOT 2 NET/DBU
option slots support various NIM plug-in option modules. These
option modules are described in the section
10/100Base-T Ethernet Interfaces
The Ethernet ports (
ETH 0/1
and
ETH 0/2
) are RJ-45 connectors. These ports provide the following:
•
10Base-T or 100Base-T dual stacked connector
•
Auto-MDIX
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
Connection directly to an external modem requires a cross-over cable.