ADTRAN 1200212L1, Руководство пользователя

Страница: 32 / 172

Chapter 1. Introduction
1-4 DSU IQ User Manual 61200212L1-1
SNMP MANAGEMENT
SNMP management capability is provided in-band with support
for RFC 1315 (frame relay DTE MIB), RFC 1213 (MIB II), and
ADTRAN Enterprise MIB. MIB files are available from ADTRAN
in the support section of the ADTRAN web page at
www.adtran.com. Telnet capability is also supported. For non-
SNMP environments, VT-100 and front panel operation is
supported.
The DSU IQ's embedded SNMP feature allows the unit to be
accessed and controlled by a network manager through the DTE or
network port, through a device running SLIP or async PPP protocol
(connected to the CONTROL port of the DSU), or through a LAN.
LAN connection requires the optional ethernet card
(P/N 1204005L1). This card provides a 10BaseT ethernet interface
to the LAN.
The term SNMP broadly refers to the message protocols used to
exchange information between the network and the managed
devices, as well as to the structure of network management data
bases. SNMP has three basic components:
Network Manager
Control program that collects, controls, and presents data pertinent
to the operation of the network devices. It resides on a network
management station.
Agent
Control program that resides in each connected network device.
This program responds to queries and commands from the
network manager and returns requested information or invokes
configuration changes initiated by the manager.
MIB
Index to the organized data within a network device. It defines the
operation parameters that can be controlled or monitored.