Adtech QS7 Series, Руководство пользователя, Страница: 36 / 56

Single-channel all-digital AC servo drives QS7 Series
31
input
voltage at
zero
P30 Inertia
ratio 0-1000
P31 Analog
input
percentage
0
－
equivalent to 100%
0-500
P32 Encoder
lines
frequency
splitting 0- Splitting frequency is not used, setting value N, mean
encoder A and B phase output frequency /N
0
－
127
P33 Encoder
alarm
allowance
0
－
Detect encoder 1
－
Not detect encoder 0
－
1
P34 JOG speed When JOG running, speed setting
0
－
5000
P35 Internal
speed 1 when running internal four section speed control mode, the
setting speed 1
0
－
5000
P36 Internal
speed 2 when running internal four section speed control mode, the
setting speed 2
0
－
5000
P37 Internal
speed 3 when running internal four section speed control mode, the
setting speed 3
0
－
5000
P38 Internal
speed 4 when running internal four section speed control mode, the
setting speed 4
0
－
5000
P39 Internal
position 1 when running internal four section position control mode, the
setting position 1
0
－
±32000
P40 Internal
position 2 when running internal four section position control mode, the
setting position 2
0
－
±32000
P41 Internal
position 3 when running internal four section position control mode, the
setting position 3
0
－
±32000
P42 Internal
position 4 when running internal four section position control mode, the
setting position 4
0
－
±32000
P43 Communic
ation
address 1
0
－
255
P44 Communic
ation baud
rate 0-4800,1-9600,2-14400,3-19200,4,5-38400,6-57600,7-
115200
0
－
7
P45 Percentage
of
torque
arrival

Set the proportional relation between analog torque
input voltage and motor actual operation torque;

The unit of set value is 0.1V/100%;

Default value is 100
，
to correspond to 10V/100%
，
i.e.
100
％
rated torque is produced after 10 V is input.
0
－
100
P46 Percentage
of
motor
static
torque

Set the torque size of lock shaft when motor stops;

The unit of its set value: rated torque ×100%;

Only position loop is valid, with invalid speed loop and
torque loop;

0 – prohibit this function prohibition;

Other values - use this function
0
－
100