Single-channel all-digital AC servo drives QS7 Series
22
4.3.1 Password input and changes
1. Password must be entered into
the system for system parameter
setting of each boot.P1 parameter
input is system password input. When
the input password is correct, it can set
other parameters; otherwise other
parameters cannot be set.
2. Password changes must enter
the old password firstly, and then you
can set the P1 parameters. If system
password cannot remember, please use
universal password: 11111.
3. When the password is set to
"9999", you can modify parameters
without password input for the next
boot.
4.3.2
Parameter settings
1 Under normal circumstances, press
"Mode" to entry
①
"Parameters"
。
2.Press " INC " or " DEC " keys to
select the parameters number which
you want to modify, and then press
"Enter".
3)Press " INC " to auto-add one value,
press " DEC " key to auto –reduce
one value, and press "Mode" key
to shift current the current number
(decimal point position) to the left,
and press "Enter" key for data
confirmation.