Adtech 4 Series, Руководство по обслуживанию

Страница: 24 / 155

ADTECH 4 series CNC System (maintainance Manual)
20
5. Automatic operation
The machine works according to cnc program is called as automatic operation. The automatic
operation modes of CNC49XX system as follow:
Memory operation, MDI operation, USB disk DNC operation.
5.1 Memory operation
The machine works according to the cnc program in CNC49XX memory, which is called as memory
operation.
The program is prestored in the memory. Select and load a program with the operation panel and
press the ―Start‖ key to start the automatic operation. Then, press ―Pause‖ key to pause, press ―Start‖ key
again to resume the operation, and press ―Reset‖ during operation to stop the program immediately.
The step of memory operation as follows:
⑴
Save the program in the memory (read 8.1 for details);
⑵
Select [Edit], [File] in the menu or press [File] on the panel to enter file operation interface;
⑶
Press the ―arrow‖keys to move the cursor, press [EOB] to select a program and load the file into
the work area;
⑷
Press [Auto]
⑸
Press the [Start] to run the program, and the indicator is on.
5.2 MDI operation
In [Monitor] interface, switch to [MDI], enter the program with keypad and machine works
according to the program. The program isn‘t saved in system memory, and lost after reboot. This is called
as MDI operation and the step as follows:
⑵
Press [Edit];
⑵
press [Monitor],then press [MDI]
⑶
input program manually;
⑷
Press [Start], [EOB] to start the program
5.3 USB disk(flash drive) DNC
The controller read program from external USB disk and worked without saving in CNC memory.
This operation is called as USB disk DNC operation.
The step of USB disk DNC operation as follows:
⑵
Insert the USB disk;