Adtech 4 Series, Руководство по обслуживанию

Страница: 23 / 155

ADTECH 4 series CNC System (maintainance Manual)
19
2:for incremental input and directly input ,there is a symbol at the left side ,‖=‖ is directly input,‖+‖ is incremental
input ,the default setting is directly input(=),in setting dialog,press
↑↓
shift directly and incremental input .
4.7.2 System parameter setting
The system parameters can be modified as follow:
➢
Select the edit mode;
➢
In the main menu, press [Para] to enter parameter setting interface;
➢
Then, press the submenu key to select the parameter type (General, manage …);
➢
Move cursor to select the parameter, enter the value and then press [EOB] to modify the parameter where the cursor
locates.
4.8 System shoutcut key operation
➢
Under [monitor]mode, [pos] interface,then ―o‖key,the controller will show a dialog ,you can select
one O program (O0001,O0002,and son on ),
“
EOB
”
for comfirming.
➢
Under [monitor]mode, [pos] interface,Jog mode,press
“←” ， “→”
,for adjusting the spindle speed.
Note :this function is effected only when the spindle is working and speed is not 0,so if the speed is
0 ,you can make a program start the spindle and speed is not 0 ,then you can use this shortcut key
function.