Hybrid Standalone NVR User Guide
SSL Enable
Check to enable SSL encryption.
Event Interval
Enter the delay time in seconds following the alarm event before another email is sent out. The interval
ranges from 0 to 3600 seconds, where 0 means there is no delay and the email is sent immediately.
Health Enable
Check the box to enable this function, which enables the system to send out a test email for testing
the connection.
Interval
Enter the delay time in seconds following the test alarm before another email is sent out. The interval
ranges from 0 to 3600 seconds, where 0 means there is no delay and the email is sent immediately.
Test
Click the
Test
button test the email connection.
Note that the system will not send out the email immediately when the alarm occurs. When the
Motion Detection or the Abnormality event activates the email, the system sends out the email
according to the interval setting specified here. This function is very useful when there are too many
emails activated by Abnormality events, resulting in a heavy load for the email server.
3.3.9
FTP
You must download or buy an FTP service tool (such as Ser-U FTP SERVER) to establish the FTP service.
Install the Ser-U FTP SERVER first. (
Start > All Programs > Serv-U FTP Server > Serv-U Administrator
).
Then set the user password and FTP folder. Note that you must grant write rights to the FTP upload
user.
Figure 3-21
NVR4200 Series User Guide
52
