Hybrid Standalone NVR User Guide
Note:
•
The system cannot open screen again if the backup operation is in progress.
•
The system refreshes the device each time you use this function and sets the current
directory as the root directory of the peripheral device.
•
If you go to the configuration backup screen first and then insert the peripheral device, you
must click the
Refresh
button to see the newly added device.
3.6.8
Default
Click the
Default
button. The Default dialog box opens. Check the box for the corresponding item
that you want to restore to the default factory setup.
Figure 3-80
After completing the setup, click the
OK
button. The system reverts to the previous menu.
NVR4200 Series User Guide
107
