Hybrid Standalone NVR User Guide
3.8.3
Schedule
You can set the recording type and time in the
Schedule
screen.
3.8.3.1
Schedule Menu
In the Main Menu, click the
Setting
button and then select
Schedule
. The Schedule menu
appears. Highlight the box to select the desired functions. When completed, click
OK
. The system
returns to the previous menu.
The following describes the options on the Schedule screen.
Figure 3-37
Channel.
Select the channel number that you want to schedule. Select
All
if you want to set for all
channels.
Pre-record.
The system can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.
Redundancy.
The system supports a redundancy backup function, which enables you to back up a
recorded file in two disks. Highlight
Redundancy
to activate this function. Before enabling this
function, you should set at least one HDD as redundant (
Main Menu > Advanced > HDD
Management
).
Note:
This function is not available if there is only one HDD.
Snapshot.
When selected, a snapshot photo is created at the scheduled interval. For instructions on
how to set up this function, see section
on page 24.
Holiday.
Click this box to enable a unique recording schedule for the days you established as
holidays in the General menu.
NVR32xx-P Series User Guide
57
