ADT MDC845 FHD Wi-Fi Mini Dome Camera
Quick Installation Guide
MDC845 FHD Wi-Fi Mini Dome Camera Installation Guide
9
3
ADT Control Enrollment
This section provides examples of two different methods for enrolling the
MDC845 FHD Wi-Fi Mini Dome Camera onto the ADT Control platform. The first
method uses a wired connection while the second method uses the Soft AP to
wirelessly connect the FHD camera to the customer’s network.
3.1
Using a Wired Connection to Enroll the Camera
•
Set up the camera as described in the previous section.
-
Ensure the Ethernet cable is plugged into the customer’s router.
-
Connect the camera’s power adapter and plug it into a power outlet.
-
Wait for the power LED to become solid green.
•
Connect a laptop or mobile device to the customer’s network and then log in
to the Control web portal, https://www.adt.com/control-login, to complete the
setup.
•
Select Video from the menu list.
•
Click Settings and then select Add Video Device.
•
Select Install from the video device list to begin adding the camera. If a
laptop or mobile device are not on the customer’s network, then enter the
MAC address of the camera.
