ADT DSC 9047, Быстрое руководство

Страница: 1 / 3

For a detailed review of the entire system, please view the DSC 9047 system manual .
Arm and Disarm
Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key
for two seconds, or enter your [security code] and exit before the exit delay expires.

To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for
two seconds, or enter your [security code] and do not leave the premises.
Disarm:

To disarm, enter your [security code] before the entry delay expires.
Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.
Quick Guide: DSC 9047