Chapter 3 ADT Pulse Enrollment
If the Camera Continually Goes Offline
If after enrolling it the camera, it continually goes offline (Power LED blinks
continually), the camera will automatically attempt to recover the wireless
connection. If the camera cannot recover on its own, take the following measures
to re-establish the Wi-Fi connection.
1.
Power cycle the camera.
2.
If the previous measure fails, move the Pulse Gateway closer to the camera.
3.
If the previous measure fails, press the camera’s reset button for 15 seconds,
and then re-enroll the camera into Pulse.
4.
If the previous measure fails, install a Wi-Fi Range Extender model
WN3000RPH-2ADPAS.
16
RC8325-ADT Wireless Day/Night HD Camera Installation Guide