IPC9000 Serie
−
Instruction manual v1.1
29
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
7.9 Wake on LAN (WoL)
This function can be used for event-driven startup of "sleeping" computers on the local network, such as
for running updates at night.
The interfaces
LAN1 … LAN 3
are available for this purpose:
The computer must be in one of the following ACPI states
*)
in order to wake up via WoL:
−
State S5: computer is shut down, voltage is present
−
State S3: energy-saving ("sleep") state
−
State S4: hibernate state
*) Advanced Configuration and Power Interface
7.9.1 Settings in BIOS
The following settings must be enabled in order to use WoL:
"Network Stack" must be enabled in the
standard BIOS
([Del] key):
−
ADS-TEC Settings / Network Stack Configuration / Network Stack = [Enabled]
The onboard Ethernet controller and WoL must be enabled in the
advanced BIOS
([Alt] + [Del] keys):
−
Chipset / PCH-IO Configuration / PCH LAN Controller = [enabled]
−
Chipset / PCH-IO Configuration / PCH LAN Controller / Wake on LAN Enable = [enabled]
