Patent No. US 8,856,780 CA 2759622
VWX Product Guide
MODULE DIAGNOSTICS
- 1 OF 2
MODULE ST
ATUS DURING:
LED 2*
LED 1**
LED STATUS
DIAGNOSTIC
MODULE PROGRAMMING
•
Flashing RED
Missing/wrong information from fi rmware or vehicle.
See fi rmware specifi c diagnostics, or contact technical support.
•
Solid RED
Module waiting for more vehicle information. Programming incomplete.
•
Flashing GREEN
Additional steps required to complete programming. Refer to install guide.
•
Solid GREEN then OFF
Module programming completed successfully.
o
OFF
No activity or module already programmed.
•
1 RED fl ash
No fi rmware on module. Connect to Weblink and fl ash device.
•
2 ORANGE fl ashes
Contact technical support.
•
3 ORANGE fl ashes
Module programming not completed.
•
4 ORANGE fl ashes
Contact technical support.
•
7 ORANGE fl ashes
Contact technical support.
•
8 ORANGE fl ashes
Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn.
•
9 ORANGE fl ashes
Loop not cut. Ensure loop is cut for automatic transmission. Reset and re-learn.
•
10 ORANGE fl ashes
Boot loader update failed. Contact technical support.
•
11 ORANGE fl ashes
T-harness detection does not match install type selection in Weblink.
TA
CH PROGRAMMING
•
Solid RED
Tach learn in progress.
•
1 GREEN fl ash
Tach signal programmed in analog.
•
2 GREEN fl ashes
Tach signal programmed in data.
•
3 RED fl ashes
No tach signal detected
•
4 RED fl ashes
System is in valet mode. Turn off valet mode to program tach.
•
6 RED fl ashes
Engine sensing set for ‘assumed start’. No tach programming required.
•
7 ORANGE fl ashes
Engine sensing not confi gured properly. Contact technical support.
* LED 2 (RS) displays generic diagnostic codes specifi c to the remote start module. Orange LED fl ashes may appear red.
** LED 1 (Bypass) displays diagnostic codes specifi c to the fi rmware loaded on the module.
Visit the programming diagnostics page for more information.
www.idatalink.com
Automotive Data Solutions Inc. © 2022
VWX
PAGE 5 OF 15
• 20220113
