28
C. RUPS II for Novell Netware(Optional)
in
r PC designated
4. After the installation is complete, please shutdown your NetWare Operating
system will load the PowerMan.NLM and execute it.
are Is loaded, the Filer Server will broadcast a
ge on the screen. You may switch to the RUPS II
ESC simultaneously.
A. UPS
s 95, 98, 2000, NT, XP
1.
. Type
. Login the File Server(with access rights in SYS: SYSTEM)
3.
C.
1.
. Execute D:\Netware\V4.x\Install.exe
1.
3.
. UPSilon 2000 for FreeBSD and Linux
1. Log in as a super-user.
2. Use the 'ftp' utility in MS-DOS to copy files into the system directory '/tmp'.
3. Follow the instructions below to make the filename conversion after the 'ftp'
29
.
et system from the menu, and configure the UPSilon for Unix(Make
e serial port), the installation Program will
rocess automatically.
File transfer:
#cd/tmp
1. Login the File Server as a SUPERVISOR or a USER with Access Right
sub-directory SYS:SYSTEM. F:\>LOGIN SUPERVISOR
#mv linux.z linux.Z, or
#mv LINUX.Z linux.Z
#chmod 755 install
2. Insert the system diskette into the floppy disk Driver A (or you
drive).
4. Execute the installation program:
#./install
Select a targ
5
sure no other process using the sam
lau
UPSilon for Unix daemon p
nch the
3. Execute INSTALL.EXE in Driver A.
F:\>A:
A:\>INSTALL
System and re-start it. The
5. When the RUPS II for NetW
sa
successful loading mes
Menu by pressing ALT_
7.2.2. UPSilon 2000 Installation
ilon 2000 for Window
From the Start Button, choose "Run".
D:\Windows\Setup.exe
2
3. Choose OK.
B. UPSilon 2000 for Novell Netware V3.1x
1
2. Execute D:\Netware\V3.1x\Install.exe
Re-boot System.
UPSilon 2000 for Novell Netware V4.x
Login the File Server(with access rights in SYS: SYSTEM)
2
3. Re-boot System
D. UPSilon 2000 for Novell Netware V5.x
Login the File Server(with access rights in SYS: SYSTEM)
2. Execute D:\Netware\V5.x\Install.exe
Re-boot System
E
