Adp Series 4000, Руководство по установке, Страница: 20 / 64

Chapter 2 Installing the Series 4000 Timeclock
2-4 ADP, Inc.
Preparing a Location Near an AC Outlet
Note
Use this method only if you cannot mount the timeclock over an AC outlet or use
the internal AC outlet option. This method does
not protect against the AC power
cord from being deliberately or inadvertently unplugged from the outlet.
1. Select a location where the distance from the knockout for the power cable at
the bottom of the timeclock to the AC outlet is not more than 5 feet (152.40
cm). Also, the top two mounting screws must be no higher than 54 and 3/8
inches (138.09 cm) above the floor.
2. Tape the mounting template at the desired height and location.
3. If you plan to run the Ethernet cable through the wall to enter the timeclock
from the back, mark the point of entry as indicated on the template.
Maximum of
54 inches
(138.09 cm.)
from floor to
top mounting
screws