Adobe PRESENTER 7, Инструкция по использованию, Страница: 37 / 92

ADOBE PRESENTER 7
Using Adobe Presenter 7
34
13
Click OK.
See also
“ Preview a presentation ” on page 8
Change video recording settings
There are many settings you can change before recording video to ensure that the video is high quality and meets
your requirements. Options are provided by the device you are using to capture video. If you change the options,
your choices are not retained. Set options each time you capture video.
1
In PowerPoint, open a presentation (PPT or PPTX file).
2 Select the slide to which you want to add the video file.
3
Select Adobe Presenter > Capture Video.
4 Under Settings, click Video Capture Device Settings .
5
Change the options as desired.
6 When finished, click OK.
Edit video files
After recording or importing video files, you can edit the files if necessary.
1
In PowerPoint, open a presentation (PPT or PPTX file).
2
Select the slide containing the video file you want to edit.
3
Select Adobe Presenter > Edit Video.
4
(Optional) If the video you want to edit is on different slide, click the menu next to Attach On and select a
different one.
5
In the playbar, use Play/Pause to start and pause the video file.
6 Click the trash can to delete the video file.
7
To switch between video in the slide area and video in the sidebar, click the menu next to As and select an option.
You can apply effects to both videos if they are on the same slide.
8
(Optional) Select Mute Audio at Playback to silence the audio track on the video.
9
(Optional) To change how much of the video is displayed for users, move or adjust the selection markers
on the bottom of the video playbar. Only the selection between the markers is played.
10
Change the following options as necessary:
Effects
Specifies the effect, such as Fade In, to apply to the video.
Speed
Specifies the duration, such as fast or slow, of the selected effect.
Start After
Specifies when to start the effect. Effect can occur after a specified time delay, animation, or audio.
Time (Sec)
Specifies the amount of time to wait before the effect takes place. (Use the Time (Sec) option together
with the Time Delay option in Start After.)
11
When you are finished editing the video file, click OK.