Adobe PREMIERE PRO 2, Руководство пользователя, Страница: 199 / 448

ADOBE PREMIERE PRO 2.0
User Guide
193
To create a submix in the Timeline panel
1 Choose Sequence > Add Tracks.
2
Specify options in the Audio Submix Tracks section, and then click OK.
To simultaneously create a submix and assign a send
1 If necessary, display the effects/sends panel in the Audio Mixer by clicking the triangle to the left of an automation
option’s pop-up menu.
2 Choose Create Mono Submix, Create Stereo Submix, or Create 5.1 Submix from any of the five sends list pop-up
menus in the Audio Mixer.
Choosing a submix type in the Audio Mixer
To route a track’s output to a submix
❖
In the Audio Mixer, select the submix name from the track output menu at the bottom of the track.
About sends
Each track contains five sends, located in the Effects And Sends panel in the Audio Mixer. Sends are often used to
route a track’s signal to a submix track for effects processing. The submix can return the processed signal to the mix
by routing it to the master track, or it can route the signal to another submix. A send includes a level knob that
controls the ratio of the send track volume to the submix volume. This value is called the wet/dry ratio, with “wet”
referring to the effects-processed submix signal and “dry” referring to the signal from the send track. A wet/dry ratio
of 100% indicates that the wet signal is output at full strength. The submix volume affects the wet signal, and the send
track’s volume affects the dry signal.
A send can be applied pre-fader or post-fader, which determines whether the track audio is sent before or after the
track’s volume fader is applied. With a pre-fader send, adjusting the track fader doesn’t affect the output level from
the send. A post-fader send maintains the wet/dry ratio, fading the wet and dry signals simultaneously as you adjust
the send track’s volume.
See also
“Routing track output” on page 196