Adobe PREMIERE 5, Руководство пользователя, Страница: 107 / 404

99 ADOBE PREMIERE 5.0
User Guide
Batch-capturing video
If you have the proper setup for device control and have a videotape recorded with timecode,
you can set up Premiere for automatic, unattended capture of several clips from the same tape.
This is called
batch capturing . You log , or create a list of, the segments you want to capture from
the tape. You create this list, called a batch list or timecode log , in the Batch Capture window.
The batch list can be created either by logging clips visually using device control or by entering
In and Out points manually. When the batch list is ready, you click one button to capture the
clips in the list.
B A C D E
F
A. Look at this column to see the status of a clip. If the column has no icon, the clip has not been captured
and is not set to be captured. The diamond ( ) indicates that this clip will be captured when you click the
Capture button in the Batch Capture window. Click to turn the diamond on or off. The check mark ( )
indicates that this clip has been captured. The X icon ( ) indicates that an error occurred while capturing
a clip.
B. Click Add to create a new batch list entry.
C. Click Delete to remove a selected batch list entry.
D. Click Sort to arrange the batch list in chronological order for efficient capture.
E. Click Capture to begin capturing all batch list entries marked with a diamond.
F. Double-click an entry to change its capture settings.
c00.book for PS Page 99 Tuesday, March 31, 1998 1:28 PM