155
CONFIGURING AND ADMINISTERING COLDFUSION 10
Basic Troubleshooting and FAQs
L
ast
u
p
dated
7/9/2
01
2
To see a detailed status of all the servers you are monitoring, click Detailed View.
The detailed view lists each server. To see details about a server in the list, highlight it. The details appear at the bottom
of the page.To see information about any server errors, click Errors.
Note:
The errors listed on this page include only server errors. Application errors appear in the individual Server Monitor
on the Summary page.
If you register some servers in the Multiserver Monitor served by 127.0.0.1, and then open a Multiserver Monitor
served by localhost, the servers are not considered to be the same servers. This is because Flash creates different shared
objects for these IP addresses. The information that is stored in these shared objects is saved using XOR encryption.
The master password for the Multiserver Monitor is stored using SHA1 encryption.
How to set per application settings
You can set the following on a per-application basis:
•
Mappings
•
Custom tag paths
These settings override the server-side settings in the ColdFusion Administrator for the specified application only.
Specifying per application settings does not change the server-wide settings. To set per application settings, you must
first enable per application settings on the Settings page of the ColdFusion Administrator. You then set the mappings
or custom tag paths in the Application.cfc file.
Custom Tags in per application settings override those defined in the ColdFusion Administrator. For example, if you
have two custom tags of the same name and they are in different locations in the Administrator and per-application
settings, the one in the per application settings is taken first.
Note:
Per application settings are supported in applications that use an Application.cfc file only, not in applications that
use an Application.cfm file. The per application settings do not work if you have disabled application variables on the
Memory Variables page of the Administrator.
To set the mappings per application,
1
Select the Enable Per App Settings option on the Settings page of the ColdFusion Administrator.
2
Include code similar to the following in your Application.cfc file:
<cfset THIS.mappings["MyMap"]="c:\inetpub\myStuff">
or
<cfset StructInsert(THIS.mappings, "MyMap", "c:\inetpub\myStuff")>
To set the custom tag paths per application,
1
Select the Enable Per App Settings option on the Settings page of the ColdFusion Administrator.
2
Include code similar to the following in your Application.cfc file:
<cfset customtagpaths = "c:\mapped1,c:\mapped2">
<cfset customtagpaths = ListAppend(customtagpaths,"c:\mapped3")>
<cfset This.customtagpaths = customtagpaths>