85
USING ADOBE PREMIERE PRO
Importing, transferring, capturing, and digitizing
Last updated 1/16/2012
Note:
When capturing with In and Out points, the earliest allowable time for the In point is 2 seconds. If the provided In
point is earlier, it will be automatically adjusted to start at 2 seconds.
For details about capturing tape from an AJA device and setup in Premiere Pro CS5.5 and later,
see this video
by Walter
Biscardi.
More Help topics
“
Set up device control
” on page 81
Capture an entire tape or portion of a tape
1
Choose File > Capture.
2
(Mac OS) If a QuickTime Capture Settings dialog box opens, choose video and audio settings appropriate to your
project.
These settings are preserved for the project, but you set them again for each new project.
3
In the Capture panel, make sure that the device is online, as indicated above the preview.
4
Insert a tape into the device. Premiere Pro prompts you to name the tape. Be sure not to give any two tapes the same
name.
Including a unique number in the name can help you avoid using the same name twice.
5
In the Setup area of the Logging pane, choose the media type from the Capture menu.
6
Rewind the tape to its beginning, or to the beginning of the portion you want to capture.
7
To create a separate file (Windows) or a subclip (Mac OS) for each new scene on the tape, select Scene Detect in the
Capture area.
8
You can capture frames that extend beyond the In and Out points of each clip. Enter the number of frames in the
Handles box in the Capture area.
9
Click Tape.
10
To stop capturing at the end of a portion, click the Stop button. Otherwise capturing stops when the tape comes to
its end.
Select and capture a clip
1
Choose File > Capture.
2
(Mac OS) If a QuickTime Capture Settings dialog box opens, choose video and audio settings appropriate to your
project.
These settings will be preserved for the project, but you may need to set them again for each new project.
3
In the Capture panel, make sure that the device is online, as indicated above the preview.
4
Insert a tape into the device. Premiere Pro prompts you to name the tape. Be sure not to give any two tapes the same name.
5
In the Setup area of the Logging pane, choose the media type from the Capture menu.
6
Use the controls in the Capture panel to move to the first frame you want to capture, and click Set In. Then move
to the last frame you want to capture, and click Set Out.
Note:
If capturing HDV footage on Mac OS, you must preview on an external TV monitor or camcorder viewfinder while
logging. The preview pane in the Capture panel will show the words Previewing On Camera.
Содержание 25520388 - Premiere Pro - PC
Страница 1: ...Using ADOBE PREMIERE PRO CS5 CS5 5...