ADLINK Technology STC2-10WP-AL Скачать руководство пользователя страница 108

Страница: 108 / 121

5.8 Save & Exit

Feature

Options Description

Save Changes and Exit

Yes

Exits system setup after saving the

changes.

Discard Changes and Exit

Yes

Exits system setup without saving any

changes.

Save Changes and Reset

Yes

Resets the system after saving the

changes.

Discard Changes and Reset Yes

Resets system setup without saving

any changes.

Save Options

Info only

Save Changes

Yes

Saves changes done so far to any of

the setup options.

Discard Changes

Yes

Discards changes done so far to any of

the setup options.

Restore Defaults

Yes

Restores/Loads default values for all

the setup options.

Save as User Defaults

Yes

Saves the changes done so far as User

Defaults.

Restore User Defaults

Yes

Restores the User Defaults to all the

setup options.

Boot Override

Info only

Launch EFI Shell from

filesystem device

Launch EFI Shell from available filesystems.

Содержание STC2-10WP-AL


























































































































Результаты поиска

Содержание STC2-10WP-AL

Отзывы:

ADLINK Technology STC2-10WP-AL, Руководство пользователя, Страница: 108 / 121

Результаты поиска

Содержание STC2-10WP-AL

Отзывы: