manualshive.com logo in svg

ADLINK Technology PCIe-FIW Series, Руководство пользователя, Страница: 12 / 53

Поделиться
Скачать
ADLINK Technology PCIe-FIW Series Скачать руководство пользователя страница 12

Hardware Reference 

 3

2

Hardware Reference

2.1

PCIe-FIW64 Specifications

IEEE1394b Port

Four IEEE1394b fully compliant cable ports at

100 Mbits/s, 200 Mbits/s, 400 Mbits/s, and 800 Mbits/s.

Fully supports provisions of IEEE P1394b-2002.

Fully compliant with provisions of IEEE std 1394-1995 
for a high performance serial bus and IEEE std 1394a-
2000.

Fully compliant with the 

1394 Open Host Controller Inter-

face Specification

, revision 1.1 and revision 1.2 draft.

Digital I/O and Trigger I/O Functions 

Four isolated digital inputs

Four isolated digital outputs

Four isolated trigger inputs

Four isolated trigger outputs

Isolated Voltage

Rated isolation voltage: 1000 V @ 60 seconds

Form Factor

x4 PCI-express interface (

PCI Express Base Specifica-

tion

, Revision 1.1 compliant)

Dimensions

W x L: 129.5 x 111.15 mm 

Operating Environment

Temperature: 0 to 55°C

Humidity: 5 to 90% RHNC

Storage Environment

Temperature: 0 to 85°C

Humidity: 0 to 95% RHNC

Содержание PCIe-FIW Series






















































Отзывы:

Нет отзывов