manualshive.com logo in svg

ADLINK Technology PCIe-7432, Руководство пользователя, Страница: 29 / 32

Поделиться
Скачать
ADLINK Technology PCIe-7432 Скачать руководство пользователя страница 29

Important Safety Instructions 

 19

PCIe-7432

Important Safety Instructions

For user safety, please read and follow all 

instructions

,

WARNINGS

, 

CAUTIONS,

 and 

NOTES

   marked  in  this  manual

and on the associated equipment before handling/operating the
equipment.

X

Read these safety instructions carefully.

X

Keep this user’s manual for future reference.

X

Read the specifications section of this manual for detailed 
information on the operating environment of this equipment.

X

When installing/mounting or uninstalling/removing 
equipment:

Z

Turn off power and unplug any power cords/cables.

X

To avoid electrical shock and/or damage to equipment:

Z

Keep equipment away from water or liquid sources;

Z

Keep equipment away from high heat or high humidity;

Z

Keep equipment properly ventilated (do not block or 
cover ventilation openings);

Z

Make sure to use recommended voltage and power 
source settings;

Z

Always install and operate equipment near an easily 

accessible electrical socket-outlet;

Z

Secure the power cord (do not place any object on/over 
the power cord);

Z

Only install/attach and operate equipment on stable 
surfaces and/or recommended mountings; and,

Z

If the equipment will not be used for long periods of time, 
turn off and unplug the equipment from its power source.

Содержание PCIe-7432

































Отзывы:

Нет отзывов