manualshive.com logo in svg

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 62 / 210

Поделиться
Скачать
ADLINK Technology PCI-8102 Скачать руководство пользователя страница 62

52

Operation Theory

As in the diagram below, 2-axis linear interpolation means to move
the XY position from P0 to P1. The 2 axes start and stop simulta-
neously, and the path is a straight line.

The speed ratio along X-axis and Y-axis is (?X: ?Y), respectively,
and the vector speed is: 

When calling 2-axis linear interpolation functions, the vector speed
needs to define the start velocity, StrVel, and maximum velocity,
MaxVel.

4.2.8

Two Axes Circular Interpolation Mode

Circular interpolation means XY axes simultaneously start from
initial point, (0,0) and stop at end point,(1800,600). The path
between them is an arc, and the MaxVel is the tangential speed.
Notice that if the end point of arc is not at a proper position, it will
move circularly without stopping.

X

Y

(0,0)

Center

(1000,0)

(1800,600)

Содержание PCI-8102



















































































































































































































Отзывы:

Нет отзывов