manualshive.com logo in svg

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 140 / 210

Поделиться
Скачать
ADLINK Technology PCI-8102 Скачать руководство пользователя страница 140

130

Function Library

6.5

Velocity mode motion

@ Name

_8102_tv_move – Accelerate an axis to a constant 

velocity with trapezoidal profile

_8102_sv_move – Accelerate an axis to a constant 

velocity with S-curve profile

_8102_emg_stop – Immediately stop

_8102_sd_stop – Decelerate to stop

_8102_get_current_speed – Get current speed

_8102_speed_override – Change speed on the fly

_8102_set_max_override_speed – Set the maximum 

orerride speed

@ Description

_8102_tv_move:

This function is to accelerate an axis to the specified constant
velocity with a trapezoidal profile. The axis will continue to travel at
a constant velocity until the velocity is changed or the axis is com-
manded to stop. The direction is determined by the sign of the
velocity parameter.

_8102_sv_move:

This function is to accelerate an axis to the specified constant
velocity with a S-curve profile. The axis will continue to travel at a
constant velocity until the velocity is changed or the axis is com-
manded to stop. The direction is determined by the sign of velocity
parameter.

_8102_emg_stop:

This function is used to immediately stop an axis. This function is
also useful when a preset move (both trapezoidal and S-curve
motion), manual move, or home return function is performed.

_8102_sd_stop:

This function is used to decelerate an axis to stop with a trapezoi-
dal or S-curve profile. This function is also useful when a preset
move (both trapezoidal and S-curve motion), manual move, or
home return function is performed. Note: The velocity profile is
decided by original motion profile.

Содержание PCI-8102



















































































































































































































Отзывы:

Нет отзывов