manualshive.com logo in svg

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 2 / 210

Поделиться
Скачать
ADLINK Technology PCI-8102 Скачать руководство пользователя страница 2

Copyright 2009 ADLINK TECHNOLOGY INC.

All Rights Reserved. 

The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.

This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.

Trademarks

NuDAQ, NuIPC, DAQBench are registered trademarks of ADLINK
TECHNOLOGY INC.

Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies. 

Содержание PCI-8102



















































































































































































































Отзывы:

Нет отзывов