manualshive.com logo in svg

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 137 / 210

Поделиться
Скачать
ADLINK Technology PCI-8102 Скачать руководство пользователя страница 137

Function Library

 127

6.4

Pulse Input/Output Configuration

@ Name

_8102_set_pls_iptmode – Set the configuration for 

feedback pulse input.

_8102_set_pls_outmode – Set the configuration for 

pulse command output.

_8102_set_feedback_src – Enable/Disable the 

external feedback pulse input

@ Description

_8102_set_pls_iptmode:

Configure the input modes of external feedback pulses. There are
four types for feedback pulse input. Note that this function makes
sense only when the Src parameter in _8102_set_feedback_src()
function is enabled.

_8102_set_pls_outmode:

Configure the output modes of command pulses. There are 6
modes for command pulse output. 

_8102_set_feedback_src:

If external encoder feedback is available in the system, set the Src
parameter in this function to an Enabled state. Then, the internal
28-bit up/down counter will count according to the configuration of
the _8102_set_pls_iptmode() function. Else, the counter will count
the command pulse output.

@ Syntax

C/C++ (DOS, Windows 95/NT)

I16 _8102_set_pls_iptmode(I16 AxisNo, I16 

pls_iptmode, I16 pls_logic);

I16 _8102_set_pls_outmode(I16 AxisNo, I16 

pls_outmode);

I16 _8102_set_feedback_src(I16 AxisNo, I16 Src);

Visual Basic (Windows 95/NT)

B_8102_set_pls_iptmode (ByVal AxisNo As Integer, 

ByVal pls_iptmode As Integer, ByVal 

pls_logic As Integer) As Integer

Содержание PCI-8102



















































































































































































































Отзывы:

Нет отзывов