ADLINK Technology PCI-8102 Скачать руководство пользователя страница 112

Страница: 112 / 210

102

MotionCreatorPro

Right play button: Clicking this button will cause the 8102 start
to outlet pulses according to previous setting.

In “Absolute Mode,” it causes the axis to move to posi-
tion.

In “Relative Mode,” it causes the axis to move back-
wards.

In “Cont. Move,” it causes the axis to start to move
according to the velocity setting, but in the opposite
direction.

In “Manual Pulser Move,” it causes the axis to go into
pulse move. The speed limit is the value set by “Maxi-
mum Velocity.”

18.Stop Button: Clicking this button will cause the 8102 to

decelerate and stop. The deceleration time is defined in
“Decel. Time.” The related function is _8102_sd_stop().

19.I/O Status: The status of motion I/O. Light-On means

Active, while Light-Off indicates inactive. The related
function is _8102_get_io_status().

20. Buttons:

Next Card: Change operating card.

Next Axis: Change operating axis.

Save Config: Save current configuration to 8102.ini And
8102MC.ini.

Close: Close the menu.

Содержание PCI-8102



















































































































































































































Результаты поиска

Содержание PCI-8102

Отзывы:

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 112 / 210

Результаты поиска

Содержание PCI-8102

Отзывы: