ADLINK Technology PCI-8102 Скачать руководство пользователя страница 107

Страница: 107 / 210

MotionCreatorPro

1. Position:

Command: displays the value of the command counter.
The related function is _8102_get_command().

Feedback: displays the value of the feedback position
counter. The related function is _8102_get_position()

Pos Error: displays the value of the position error coun-
ter. The related function is _8102_get_error_counter().

Target Pos: displays the value of the target position
recorder. The related function is
_8102_get_target_pos().

2. Position Reset: clicking this button will set all positioning

counters to a specified value. The related functions are:

_8102_set_position()

_8102_set_command()

_8102_reset_error_counter()

_8102_reset_target_pos()

3. Motion Status: Displays the returned value of the

_8102_motion_done function. The related function is
_8102_motion_done().

4. INT Status:

int_factor bit no: Set int_factor bit.

Normal INT: display of Normal INT status. The related
function is _8102_wait_motion_interrupt ().

Error INT: display of Error INT status. The related func-
tion is _8102_wait_error_interrupt ().

GPIO INT: display of GPIO INT status. The related func-
tion is _8102_wait_gpio_interrupt ().

5. Velocity: The absolute value of velocity in units of PPS.

The related function is _8102_get_current_speed().

6. Show Velocity Curve Button: Clicking this button will

open a window showing a velocity vs. time curve. In this
curve, every 100ms, a new velocity data point will be
added. To close it, click the same button again. To clear
data, click on the curve.

Содержание PCI-8102



















































































































































































































Результаты поиска

Содержание PCI-8102

Отзывы:

ADLINK Technology PCI-8102, Руководство пользователя, Страница: 107 / 210

Результаты поиска

Содержание PCI-8102

Отзывы: