ADLINK Technology NuPRO-E330 Скачать руководство пользователя

Страница: 52 / 104

Driver Installation

4.6

Intel® Active Management Technology

Follow these instructions to install the Intel® Active Management
Technology driver.

1. Locate the directory

X:\NuPRO\NuPRO-E330\Others\

on the ADLINK All-in-One

DVD, and extract the file

setup.exe

from the following

archive:

iAMT_Intel_Management_Engine_Interface_SOL_driver_
All_WinOS_v6.0.0.1195.zip

2. Run the program

setup.exe

and follow the onscreen

instructions. Restart the system if prompted.

4.7

TPM Driver

Follow these instructions to install the TPM driver.

1. Locate the directory

X:\NuPRO\NuPRO-E330\TPM\

on the ADLINK

All-in-One DVD, and extract the file

setup.exe

from the

following archive:

ST_TPM_All_WinOS_v3.5.SP1.zip

2. Run the program

setup.exe

and follow the onscreen

instructions. Restart the system if prompted.

4.8

Audio Driver

Follow these instructions to install the audio driver for the optional
DB-Audio2 daughter board.

1. Place the ADLINK All-in-One DVD to the optical drive.

2. Locate the audio driver from the directory

X:\Audio Daughter Board\DB-Audio2\

, then dou-

ble-click on the

setup.exe

file to start installation.

3. Follow the screen instructions to complete installation,

then restart the system if prompted.

NOTE:

Before installing the audio driver, check the BIOS settings to
make sure that audio is enabled:

Chipset > PCH Configura-

tion > HDA Controller

(see “PCH Configuration” on

page 68).

Содержание NuPRO-E330









































































































Результаты поиска

Содержание NuPRO-E330

Отзывы:

Похожие инструкции для NuPRO-E330

Бренды по названию

Популярные бренды

ADLINK Technology NuPRO-E330, Руководство пользователя

Результаты поиска

Содержание NuPRO-E330

Отзывы:

Похожие инструкции для NuPRO-E330

Бренды по названию

Популярные бренды