ADLINK Technology NuPRO-860 Series, Руководство пользователя

Страница: 38 / 54

30 Getting Started
Memory Module Installation ). There is an alignment key on the
memory module to assist users with installation.
Note: Ensure that the CPU socket is in the locked position,
otherwise the memory module will not seat properly.
Figure 3-3: First Memory Module Installation
Installing the second memory module
Carefully remove the EM-64 CPU Module from the Carrier Board
by removing the mounting screws and lifting it at the end nearest
the board-to-board connector as shown in
Figure 3.4: EM-64 CPU
Module Removal . Insert the second memory module into the
lower DIMM slot on the underside of the Main Board as shown in
Figure 3.5: Second Memory Module Installation below using
the same procedure as described above. Re-attach the CPU Mod-
ule to the carrier board by aligning the two halves of the board-to-
board connector and pressing down firmly on the CPU Module at
the end nearest the connector.