manualshive.com logo in svg

ADLINK Technology NuPRO-851, Руководство пользователя

Поделиться
Скачать
ADLINK Technology NuPRO-851 Скачать руководство пользователя страница 39

Device Driver Installation

 33

4.2 VGA Driver Installation

This section provides information on how to install the VGA driver.
Please follow the instructions carefully. 

Installing Drivers for Windows 2000/XP

The following section describes the normal display driver instal-
lation procedures for Windows 2000/XP. 

1. Boot Windows 2000/XP.

2. The driver is included in the ADLINK CD. Run

win2k_xp1420.exe

 under the directory:

X:\NuPRO\NuPRO-851\VGA\

3. Click 

Next>

 on Welcome screen. And select 

Typical

 on

Setup Type screen and click 

Next>

.

4. Use default program folders on Select Program Folder

screen. Click 

Next>

 to install driver. Finally, click 

Finish

to restart.

4.2.1 LAN Driver Installation

This section describes the LAN driver installation for the onboard
Ethernet controllers, the Marvell 88E8052. The relative drivers are
located in the following directory of the ADLINK CD:

X:\NuPRO\NuPRO-851\Ethernet\

The Marvell LAN drivers support the following OS or platforms:
Windows 98 SE, Windows ME, Windows NT 4.0, Windows 2000,
Windows XP, and Linux

The Windows XP and Windows 2000 drivers are included in the
ADLINK CD. Driver Installation information for Windows systems
is included below. 

Windows may automatically try to install a LAN driver within its
directory. We recommend that users manually install the latest
LAN driver, which comes with the ADLINK CD to guarantee com-
patibility. After installing Windows operation system, please update
to the new drivers by following these procedures. 

Содержание NuPRO-851













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды