ADLINK Technology M-302 Скачать руководство пользователя

Страница: 97 / 100

Important Safety Instructions

M-302

Important Safety Instructions

For user safety, please read and follow all

instructions

WARNINGS

CAUTIONS,

and

NOTES

marked in this manual

and on the associated equipment before handling/operating the
equipment.

Read these safety instructions carefully.

Keep this user’s manual for future reference.

Read the specifications section of this manual for detailed
information on the operating environment of this equipment.

When installing/mounting or uninstalling/removing
equipment:

Turn off power and unplug any power cords/cables.

To avoid electrical shock and/or damage to equipment:

Keep equipment away from water or liquid sources;

Keep equipment away from high heat or high humidity;

Keep equipment properly ventilated (do not block or
cover ventilation openings);

Make sure to use recommended voltage and power
source settings;

Always install and operate equipment near an easily
accessible electrical socket-outlet;

Secure the power cord (do not place any object on/over
the power cord);

Only install/attach and operate equipment on stable
surfaces and/or recommended mountings; and,

If the equipment will not be used for long periods of time,
turn off and unplug the equipment from its power source.

Содержание M-302





































































































Результаты поиска

Содержание M-302

Отзывы:

Похожие инструкции для M-302

Бренды по названию

Популярные бренды

ADLINK Technology M-302, Руководство пользователя

Результаты поиска

Содержание M-302

Отзывы:

Похожие инструкции для M-302

Бренды по названию

Популярные бренды