36
Function Library
4.3.10 Device ID
Purpose
This function gets card ID of device.
Prototype
C/C++
int Hdv62_GetDeviceID (UINT Number, UINT& ID)
C#
int GetDeviceID (uint Number, out uint ID)
VB.Net
GetDeviceID (ByVal Number as UInteger, ByRef ID as
UInteger) As Integer
Parameters
Number
The number of device. The allowed value is from 0 to 15.
ID
Card ID can be set by DIP Switch on card. Its possible value
is from 0 to 15. Card ID can distinguish cards when multi-
cards were installed on one system. Set them to different
number according to chapter 2 Hardware Reference. Leave
card ID as default, all are same is no problem, if you don’t
care about it.
Return Value
No error occurs if return value >= 0; if negative value, please refer
to Section 4.9 for error information about return codes.
Содержание HDV62
