ADLINK Technology Express-SL2 Скачать руководство пользователя | Manualshive

Страница: 7 / 96

background image

Express-SL2

Introduction

1

1. Introduction

The Express-SL2 is a COM Express® COM.0 R2.1 Type 2 module supporting the 64-bit 6th Generation Intel®
Core™, Intel® Xeon® E3 and Intel® Celeron® processors (formerly “Skylake H”) with Intel® 170, HM170 and
CM236 Chipset. The Express-SL2 supports all Type 2 legacy I/O as well as Windows 7 and WES7 operating
systems. It is ideally suited for customers who want to extend the production life of existing Type 2 based systems
for at least another 10 years.

The Express-SL2 features Intel® Hyper-Threading Technology (up to 4 cores, 8 threads) and DDR4 dual-channel
memory at 1866/2133 MHz with ECC/non-ECC support dependent on processor/chipset combination to provide
excellent overall performance. Intel® Flexible Display Interface and Direct Media Interface provide high speed
connectivity to the Mobile Intel® QM170, HM170, CM236 Chipset.

Integrated Intel® Generation 9 Graphics includes features such as OpenGL 4.4/4.3/4.2, DirectX 11, Intel® Clear
Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video Acceleration (DXVA)
support for full H.265/HEVC, MPEG2 hardware decode. Graphics outputs include VGA and LVDS.

The Express-SL2 supports a PATA port, 32-bit PCI bus rev 2.3, SATA 6Gb/s ports, a multiplexed PCI Express®
x16 graphics bus for discrete graphics expansion or general purpose PCI Express x8 or x4 connectivity, USB 2.0
ports and a single onboard Gigabit Ethernet port. In addition, two DDI channels are supported by build option in
place of PCI Express lanes. Support is also provided for SMBus and I

2

C and the module is equipped with SPI AMI

EFI BIOS with CMOS backup, supporting embedded features such as remote console, CMOS backup, hardware
monitor, and watchdog timer.

«
...
5
6
7
8
9
...
»

Содержание Express-SL2

































































































Отзывы:

Нет отзывов

Похожие инструкции для Express-SL2

Univerge SV8100

Бренд: NEC Страницы: 44

Бренд: Fracarro Страницы: 12

MultiConnect SE MTS2EA

Бренд: Multitech Страницы: 2

Бренд: Zoom Страницы: 48

Бренд: H3C Страницы: 3

Бренд: Paradyne Страницы: 6

Бренд: SeaLevel Страницы: 21

Бренд: Avenview Страницы: 28

Бренд: Renesas Страницы: 746

Бренд: EZCast Pro Страницы: 4

Бренд: ekwb Страницы: 2

Бренд: Pilz Страницы: 12

Internal All-in-One Digital Media Drive ULT31793

Бренд: Ultra Products Страницы: 1

Blend PRO BP-2002

Бренд: FOLSOM Страницы: 89

Бренд: WiebeTech Страницы: 8

Audio Plus 3200

Бренд: Zoltrix Страницы: 34

INTEL CORE i5 SYSTEM BOARD

Бренд: Aprotech Страницы: 154

Бренд: Silicon Laboratories Страницы: 91

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды