ADLINK Technology EOS-JNX-G, Руководство пользователя, Страница: 16 / 53

6 Introduction
1.4 External Layout
EOS-JNX Series Front Panel
Figure 1-5: Front Panel I/O Connectors
Item Name Description
A Ethernet Port GigE LAN from NVIDIA® Jetson™ Xavier NX.
B USB Port
1x USB 2.0 and 1x USB 3.0 general use for input/
output devices like keyboard, mouse, or dongle
receiver.
C PoE Ports
4x PoE (Power over Ethernet) ports for PoE IP or
GigE cameras. Each channel provides 30W max.
(802.3at), with 4 ports totaling 60W max. The power
budget allocation priority is from Port 4 to 1 if the PoE
total power budget is over 60W.
D PoE Status LED PoE port enabled status.
E
Uplink Port
(EOS-JNX-I only)
NVR (Network Video Recorder) connection for PoE
IP cameras (EOS-JNX-I only).
Maximum bandwidth: 1Gbps.
Note
: The Uplink Port (E) cannot be used as an
Ethernet connection. Make sure to connect a LAN
cable to the Ethernet Port (A).
F DI/O Port
4-channel digital I/O port via D-sub connector,
expandable to 37-pin DIO board with cable.
G HDMI Port HDMI 1.4 display output.
H DC in Connector
12V to 24V DC-in. Connect power cord to terminal
block first, then to power source.
Table 1-2: Front Panel I/O Connectors & Controls
A
B C D E G H K L M
F J
I