ADLINK Technology cRTV-24 Скачать руководство пользователя страница 53

Страница: 53 / 178

Installation Guide

Installation Guide

3.1 Hardware Installation

3.1.1 RTV Series

Use the following steps to install the RTV series board on the PCI
bus:

1. Remove the computer cover using the instructions from

the computer manual.

2. Check that there is an empty PCI (32-bit) slot t accom-

modate the board. If there is not an empty slot, remove a
PCI board from the computer to make room for the RTV-
24 board and take note of the chosen slot number.

3. Remove the blank metal plate located at the back of the

selected slot (if any). Keep the removed screw to fasten
the RTV-24 board after installation.

4. Carefully position the RTV-24 in the selected PCI slot as

illustrated below. If using a tower computer, orient the
board to suit the board slots.

Figure 3-1: RTV-24 Installation

5. Once perfectly aligned with an empty slot, press the

board firmly but carefully into the connector.

Содержание cRTV-24



















































































































































































Результаты поиска

Содержание cRTV-24

Отзывы:

ADLINK Technology cRTV-24, Руководство пользователя, Страница: 53 / 178

Результаты поиска

Содержание cRTV-24

Отзывы: