ADLINK Technology cPCIS-6418U Series, Руководство пользователя

Страница: 20 / 66

12 Getting Started
2.5 Powering Up the System
Connect the supplied power cord to the socket on the back of the
chassis. All supplied PSUs are full range 90-240VAC and do not
require input voltage setting. Insert the desired boards into the
appropriate card slots as described in Sections 2.2 and 2.3.
The cPCIS-6418U Subsystem features a guarded power switch.
Use the tool provided in the Accessory Packet or a suitably
shaped object (such as a pen) to actuate the power switch and
power up the system. Voltage LEDs allow convenient monitoring
of the power supply.
Refer to the diagrams below for LED and switch locations.
Figure 2-5: cPCIS-6418U Series switches and LEDs