ADLINK Technology cPCIS-3330 Series, Руководство пользователя

Страница: 17 / 76

Getting Started 9
they are pulled outwards) by first pressing on the release
buttons with your thumb.
3. Carefully insert the module into the desired slot by slid-
ing the edges of the board into the appropriate card
guide rail. Take care to ensure correct alignment of the
card with the chassis during insertion to prevent damage
to the card and/or backplane.
Figure 2-2: Installing 6U CompactPCI card
4. Continue inserting the card until the handles engage with
the chassis.
5. Push inwards on the handles for final insertion. Ensure
that the buttons on the handles fully latch into position as
unless this is done the card is not correctly inserted. Fas-
ten the retaining screws at each end of the card (2 for
single slot cards, 4 for double slot cards).