nanoX-BT
Page 9
2.
Specifications
2.1.
Core System
¾
CPU:
Single, dual or quad-core Intel® Atom™ or Celeron® Processor
•
Atom™ E3845 1.91 GHz 542/792 (Turbo) 10W (4C/1333)
•
Atom™ E3827 1.75 GHz 542/792 (Turbo) 8W (2C/1333)
•
Atom™ E3826 1.46 GHz 533/667 (Turbo) 7W (2C/1066)
•
Atom™ E3825 1.33 GHz 533 (No Turbo) 6W (2C/1066)
•
Atom™ E3815 1.46 GHz 400 (No Turbo) 5W (1C/1066)
•
Atom™ E3805 1.33 GHz (No Graphics) 3W (2C/1066)
•
Celeron® N2930 1.83/2.16 (Burst) GHz, 313/854 (Turbo) 7.5W (4C/1333)
•
Celeron® J1900 2.0/2.42 (Burst) GHz, 688/854 (Turbo) 10W (4C/1333)
Supports: Single, dual or quad Out-of-Order Execution (OOE) processor cores, Intel® VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture,
IA 32-bit, PCLMULQDQ Instruction, DRNG, Intel® Thermal Monitor (TM1 & TM2)
Note: Availability of features may vary between processor SKUs.
¾
Cache
:
Primary 32 kB, 8-way L1 instruction cache and 24 kB, 6-way L1 write-back data cache
•
2MB L2 Cache: E3845, N2930 and J1900
•
1MB L2 Cache: E3827, E3826, E3825 and E3805
•
512k L2 Cache: E3815
¾
Memory
:
Single channel non-ECC 1333/1066 MHz soldered DDR3L memory up to 4GB
Note: Availability of features may vary between processor SKUs.
¾
Embedded BIOS
:
AMI EFI with CMOS backup in 8MB SPI BIOS
2.2.
Expansion Busses
¾
3 PCI Express x1 GEN2 (AB): lanes 0/1/2 (build option: PCIe x4, lose GbE)
¾
LPC bus, SMBus (system) , I
2
C (user)
2.3.
SEMA Board Controller
¾
Type: ADLINK Smart Embedded Management Agent (SEMA)
¾
Supports:
•
Voltage/Current monitoring
•
Power sequence debug support
•
AT/ATX mode control
•
Logistics and Forensic information
•
Flat Panel Control
•
General Purpose I
2
C
•
Failsafe BIOS (dual BIOS )
•
Watchdog Timer and Fan Control
2.4.
Debug Headers
¾
40-pin multipurpose flat cable connector, used in combination with DB-40 debug module providing BIOS POST code LED, BMC
access, SPI BIOS flashing, Power Testpoints, Debug LEDs
¾
Optional 60-pin XDP header for ICE debug of SOC on breakount PCB extension
