Page 14
nanoX-BT
3.
Pinouts and Signal Descriptions
3.1.
AB Pin Definitions
The nanoX-BT is a Type 10 module supporting USB3.0 and DDI channel on the AB connector
In below table all standard pins of the COM Express specification are described, also those not supported on the nanoX-BT !
Note: Signals not supported on the nanoX-BT module are crossed out
Type 10 COM.0 Rev. 2.1
Row A
Row B
Pin
Name
Pin
Name
1
GND(FIXED)
1
GND(FIXED)
2 GBE0_MDI3-
2 GBE0_ACT#
3 GB
3 LPC_FRAME#
4 GBE0_LINK100#
4 LPC_AD0
5 GBE0_LINK1000#
5 LPC_AD1
6 GBE0_MDI2-
6 LPC_AD2
7 GB
7 LPC_AD3
8 GBE0_LINK#
8 LPC_DRQ0#
9 GBE0_MDI1-
9 LPC_DRQ1#
10 GB
10 LPC_CLK
11
GND(FIXED)
11
GND(FIXED)
12 GBE0_MDI0-
12 PWRBTN#
13 GB
13 SMB_CK
14 GBE0_CTREF
14 SMB_DAT
15 SUS_S3#
15 SMB_ALERT#
16 S
16 S
17 SATA0_TX-
17 SATA1_TX-
18 SUS_S4#
18 SUS_STAT#
19 S
19 S
20 SATA0_RX-
20 SATA1_RX-
21
GND(FIXED)
21
GND(FIXED)
22 USB_SSRX0-
22 USB_SSTX0-
23 US
23 US
24 SUS_S5#
24 PWR_OK
25 USB_SSRX1- 25
USB_SSTX1-
26 US 26
US
27 BATLOW#
27 WDT
28 (S)ATA_ACT#
28 AC/HDA_SDIN2
29 AC/HDA_SYNC
29 AC/HDA_SDIN1
30 AC/HDA_RST#
30 AC/HDA_SDIN0
31
GND(FIXED)
31
GND(FIXED)
32 AC/HDA_BITCLK
32 SPKR
33 AC/HDA_SDOUT
33 I2C_CK
34 BIOS_DIS0#
34 I2C_DAT
