ADLINK Technology CM1-86DX3, Техническое описание

Страница: 2 / 59

ii Preface
Preface
Disclaimer
Information in this document is provided in connection with ADLINK products. No license,
express or implied, by estoppel or otherwise, to any intellectual property rights is granted by
this document. Except as provided in ADLINK´s Terms and Conditions of Sale for such prod-
ucts, ADLINK assumes no liability whatsoever, and ADLINK disclaims any express or implied
warranty, relating to sale and/or use of ADLINK products including liability or warranties relat-
ing to fitness for a particular purpose, merchantability, or infringement of any patent, copy-
right or other intellectual property right. If you intend to use ADLINK products in or as medical
devices, you are solely responsible for all required regulatory compliance, including, without
limitation, Title 21 of the CFR (US), Directive 2007/47/EC (EU), and ISO 13485 & 14971, if
any. ADLINK may make changes to specifications and product descriptions at any time, with-
out notice.
Trademarks
Product names mentioned herein are used for identification purposes only and may be trade-
marks and/or registered trademarks of their respective companies.
Revision History
Copyright © 2015, 2016, 2017, 2018, 2020, 2021 ADLINK Technology, Inc.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Audience
This manual provides reference only for computer design engineers, including but not limited to
hardware and software designers and applications engineers. ADLINK Technology, Inc.
assumes you are qualified to design and implement prototype computer equipment.
Revision Reason for Change Date
1.00 Initial Release Oct/15
2.00
Added VGA DDC interface to Chapter 3; revised CFast
information; added CFast pinout Chapter 3; transposed CN14
and CN16 headers for COM1 and COM2; added cooling
airflow specifications; added Getting Started section to chapter
1; added Component Features section to chapter 2;
restructured the format of this manual to four chapters
Jul/16
2.1
Added Appendix B, System Resources; updated Ordering
Information in Table 1-1
Jan/18
2.2
Revised RS485/422 mode signals in Table 3-1; changed
positions of labels for jumper headers in Figure 2-5; added
Prop 65 warning and Battery labels to Preface
Jul/18
2.3 Removed SPI flash support; add heat sink installation 2020-04-24
2.4 Add French safety warnings 2021-02-04