5
aTCA-80606PA
1 Safety
The intended audience of this User’s Manual is system integrators and hardware/software
engineers.
1.1 Safety Symbols used in this document
Hazardous voltage!
This is the electrical hazard symbol. It indicates that there are dangerous
voltages inside the Shelf.
Caution!
This is the user caution symbol. It indicates a condition where damage of the
equipment or injury of the service personnel could occur. To reduce the risk of
damage or injury, follow all steps or procedures as instructed.
Risk of electrostatic discharge!
The Shelf contains static sensitive devices. To prevent static damage you must
wear an ESD wrist strap.
1.2 General Safety Precautions
Warning!
Voltages over 60 VDC can be present in this equipment. As defined in the
PICMG 3.0 Specification, this equipment is intended to be accessed, to be
installed and maintained by qualified and trained service personnel only.
•
Service personnel must know the necessary electrical safety, wiring and connection
practices for installing this equipment.
•
Install this equipment only in compliance with local and national electrical codes.
•
For additional information about this equipment, see the PICMG 3.0 Specification
(
www.picmg.org
).
1.3 Reference and Architecture Specifications
These documents contain information and specifications related to the requirements
listed in this document.
•
Pigeon Point Systems IPM Sentry Shelf-External Interface Reference
•
Pigeon Point Systems Shelf Manager User Guide
•
PICMG 3.0 Revision 3.0 AdvancedTCA Base Specification
